 |
Featuring
- Hipot test to 6kVDC 10mA
- Hipot test to 5kVAC 40mA
- Ground Bond test to 42
Amps RMS
- Insulation Resistance 50
to 1000V
- Automated Remote
Interface
|
Performance The new Vitrek V4 Hipot Electrical Safety Tester combines AC & DC Hipot with high current ground bond and insulation resistance testing, all in one feature rich, fully automated, easy to use instrument. This programmable Hipot tester provides test voltages up to 6KVDC and 5KVAC, programmable in 5V increments. As a Ground Bond Tester, it features up to 42 amps AC to test the integrity of the ground bond. As a high voltage Insulation Resistance tester the unit tests for Insulation Resistance Breakdown by providing 10 levels of HV trip points and provides 3 full scale measurements up to 10,000MΩ at 1000 volts. The uncompromising performance of the V4 delivers fast, consistent, reliable results – test after test. And it does it from a single test connection. The V4’s crystal clear LCD user interface is remarkably easy to use and has all the information you need to get the job done right the first time. Reliability The uncompromising performance of the V4 delivers fast, consistent, reliable results – test after test. The V4’s crystal clear LCD user interface is remarkably easy to use and has all the information you need to get the job done right the first time. And the advanced reliability design of the V4 insures that it will remain on the job – day after day, year after year. World class manufacturers around the globe depend on Vitrek. Economical Vitrek’s V4 is a 4-in-1 Electrical Safety Compliance Tester incorporating High Voltage test capability for AC Hipot, DC Hipot, Insulation Resistance and high amperage test currents for ground bond continuity testing….. for about half the price you would expect to pay. Features/Benefits
5kVAC 40mA, 6kVDC 10mA -
Ground Bond 3 to 42 Amps RMS Multi-mode IR 50 to 1000V SFI™ Safety Fault Interrupt RS232 Standard, available GPIB High Speed Discharge 36 Position Memory Selectable Arc Detection PLC Remote Interface Three Year Extended Warranty* Top of Page Specifications AC Hipot
| Voltage
Range: | 100 to 5000VAC RMS |
| Voltage
Setting Resolution: | 5V/step |
| Voltage
Regulation: | 1% of reading ± 5V |
| Voltage
Accuracy: | 1% of reading ± 10V |
| Voltage
Monitoring: | At Output Terminals |
| Output
Current: | 30mA to 40mA 180S max, 10 to 30mA
continuous. Below 500V 10mA max |
| Min/Max
Current Limits: | 0.1 to 40mA |
| Current
Accuracy: | 1% of reading ± 50mA | Top of Page DC Hipot
| Voltage
Range: | 100 to 6000VDC |
| Voltage
Setting | Resolution: 5V/step |
| Voltage
Regulation: | 1% of reading ± 5V |
| Voltage
Accuracy: | 1% of reading ± 10V |
| Voltage
Monitoring: | At Output Terminals |
| Max Output
Current: |
10mA continuous, below 500VDC 2mA
continuous |
| Min/Max
Current Limits: | 0.1 to 10mA |
| Current
Accuracy: | 1% of reading ± 50mA | Insulation Resistance
| DC Output
Voltage: | 50, 100, 500 or 1000V |
| Resistance
Range: | 1 to 9999MW |
|
Resistance
Accuracy: (% of reading) |
| 50, 100 VDC | 1-50MW 5%
51-200MW 10%
201-1999MW 20% |
| 500, 1000 VDC | 1-500MW 5%
501-2000MW 10%
2001-9999MW 20% |
| Multi-Mode IR™: | Select 1 of 3 modes - Test passes
on good reading, test fails on bad reading, pass/fail determined
at end of test time. | Top of Page Ground Bond/Continuity
| Test
Current: | 3 to 42 Amps RMS |
| Terminal
Configuration: | 4 wire Kelvin |
| Resistance
Range: | 0 to 600mW |
| Resistance
Resolution: | 100mW |
| Resistance
Accuracy: | 1% reading ± 3mW |
| Compliance
Voltage: | 8V at terminals |
| Current
Resolution: | 0.01A |
| Voltage
Resolution: | 0.01V | Top of Page General
| Test
Database: | 10 test sequences with up to 16
steps per test sequence |
| Front Panel
Lockout: | Prevents database edit while in
lockout mode |
| Arc Detect: | 10 level trip select |
| Remote
Interfaces: | Fully interactive RS232 -
standard. PLC Interface with Outputs of Testing, Pass,
Fail and Inputs of Start, Reset - standard. Talk/Listen GPIB interface - Option GP-V4. |
| Timer
Accuracy: | 0.25% ± 50mS |
| Power
Source: | 100, 120, 220, 230VAC (±10%
50/60Hz), 350W max |
| Operating
Environment: | Indoor use, altitude up to 6500
ft (2000m). Installation Category II. Pollution Degree 2. |
| Operating
Temperature: | 0°C to 40°C, 80% RH |
| Storage
Temperature: | -10°C to 70°C, 70% RH |
| Dimension: | 17.6"L x 13"W x 5.9"H,
(446mmL x 330mmW x 149mmH) |
| Weight: | 33lbs (15kg) net, 40 lbs (18 kg)
ship |
| Accessories: | NIST Cal Cert, TL-20-50 &
K-2 Test
Leads, Manual and Power Cord. |
| Accuracy: | Stated specifications apply for 1
year at 23°C ± 5°C. |
| Calibration: | ANSI/NCSL Z540 Certificate of
Calibration with Data provided, traceable to NIST. |
| Compliance: | CE Mark Certified to EN61010 and
EMC Directives EN50081-1 & EN50082-2. |
| Warranty: | * 3 Year Extended Warranty with
registration and annual factory calibration. 1 year parts and labor
standard. | QuickTest™ Software
| Option
QT-V4: | Bundled Test Automation Software
and PC Serial Interface Cable. Easy to load graphical test
sequence development and operating environment. Provides
time/date, operator, test parameters, test results and readings.
Results may be viewed, printed out or exported to a database
program. | Top of Page Prices listed in the table are in US$ and apply to North American destinations only. For inter-continental destinations, please add 5% to the prices shown below.
| ID# | Product | Price $ | Order |
| V4 | Electrical Hipot Safety Tester | $3,295.00 | |
| GP-V4 | GPIB Interface Option
IEEE-488.2 |
495.00 | |
| QT-V4 | Bundled QuickTest™ Software with PC | 295.00 | |
| TL-115-4 | Hipot/GB Outlet Test Adaptor | 195.00 | |
| TL-10-50 | High Voltage Probe Lead Set | 95.00 | |
| TL-20-50 | High Voltage Alligator Lead Set | 85.00 | |
| TL-IEC4 | IEC Socket Lead Set | 115.00 | |
| K-2 | High Current, 4-wire, 2 Clip Kelvin
Lead Set | 185.00 | |
| K-4 | High Current, 4-wire, 4 Clip Kelvin
Lead Set | 195.00 | |
| RM-4 | Rack Mount Kit | 295.00 | |
| TL-TP02 | HV Test Pistol Lead Set | 195.00 | |
| RPO-V4 | Rear Panel Output Terminals | 245.00 | |
| IPS-500 | 500VA Rated Isolated Power Supply Option | 195.00 | |
| OM-V4 | Additional Operator's Manual | 65.00 | |
| V16 | 16 Channel HV Scanner | 2,990.00 | |
| V17 | 8 Channel HV/8 Ch. High Current
Scanner | 2,190.00 | | | HTC-2419 | Hard Travel Case with Wheels and
Extendable Handle | 590.00 | | Top of Page Rental
Information 30 Day Minimum. Rates are for
standard models.
Additional options are available. Please contact factory for a quote
or for further assistance.
| Duration | Price | Billing Cycle | Buyout | | 30 Days |
$530 | 30 Days | List Price minus 30% of Rental Paid | | 60 Days | $800/2 Months | 60 Days | List Price minus 40% of Rental Paid | | 3 to 11 Months | $400/Month | 30 Days | List Price minus 50% of Rental Paid | | 12 Months | $400/Month | 30 Days | $1 Buyout |
This document requires that you have the Adobe Acrobat reader which
you can download for free here.
|
