930i Ground Bond Tester is Discontinued see - 959i

Depend on Vitrek’s 930i, Ground Bond Tester and AC Low-Ohms Ohmmeter, for all of your programmable or manually operated electrical safety compliance tester needs for testing high current ground bond integrity, ground bond resistance, earth ground continu

Click Here to Ask An Expert!

Programmable Test Current to 40 Amps
50-400Hz Programmable Current Frequency
Local/Computer Programmable
Programmable Resistance Limits
Programmable Test Time Durations
AC Ohmmeter to 10uΩ Resolution
Tests to UL/IEC Specifications

Certified to EN61010

Programmable Features (VICL and serial com standard, PLC optional)

The Vitrek 930i Ground Bond Tester features front panel or remote computer programmable control of test current amplitude and frequency and test time duration to test the ground bond integrity and continuity of the Device Under Test (DUT). The current may be front panel or remotely programmed from 3 amps to 40 amps, from 50-400Hz and from 1-9999 seconds for DUT testing in compliance with UL and IEC specifications.

At Vitrek we believe that your investment in safety compliance test equipment is an extremely important one. We realize that today's test professional is constantly faced with changing test requirements and that is why we build versatility into each test instrument we manufacture. The 930i Ground Integrity Analyzer is a case in point. All test parameters of the 930i are fully programmable: Output Current and Frequency, min/max Resistance Limits and Test Duration. Whether you're running the 930i from its nonvolatile test database or via computer control, ground bond testing has never been simpler or faster. The unit's password protected test database editor provides for quick and easy modification of existing tests, yet offers the security and integrity by demanding ISO 9000 quality systems.

Seamless Test Integration

The 930i is designed to work hand-in-hand with Vitrek Hipot Testers so that dielectric testing and ground bond testing can be accomplished efficiently and effortlessly from a single test set up. The results are automatically integrated into a unified test report with overall pass/fail status as well as step-by-step results with final values. VICL and serial com are standard while PLC optional.

3 to 30 Amp Test Current - meets a wide variety of regulatory test specifications

```
Password Protected Test Routine Storage
```
```
Frequency Synthesis 50-400Hz
```

10mW Measurement Resolution - more measurement confidence and repeatability

4-wire Kelvin Sensing - eliminates lead resistance errors

Fully Programmable via front panel, hipot or computer control

```
Hipot and Ground Test from one set-up
```

High Speed Test throughout with actual measurement values

Display Prompted Setup - easy to use, fully adjustable

```
CE Mark Certified to EN61010
```
```
Made in the U.S.A.
```
```
5 Year Extended Warranty 
```

Alternating Current Output

Range	3 to 30 amperes RMS, programmable
Resolution	1 amp
Output Frequency	Sine wave synthesis, 50 Hz to 400Hz
Compliance Voltage	3 volts RMS
Regulation	± 0.25% no load to full load

Resistance Measurement

Resistance Limit	User programmable max. and min. Test is automatically aborted when limit is exceeded.
Resistance Range	1W at 3 amps linearly decreasing to 100 mW at 30A
Resistance Resolution	10mW
Measurement Accuracy	± 1.0% of reading; ± 0.5% of range
Accuracy	Specifications apply for 1 year, ± 5°C from the cal temp within 20°C to 30°C
Calibration	Certificate of calibration traceable to the National Institute of Standards and Technology (NIST) provided
Test Time	Digital count down timer, programmable 1 to 9999 seconds
Terminal Configuration	True four-wire Kelvin

General Specifications

Remote Interface	VICL and serial com standard. PLC optional.
Display	40 character dot matrix illuminated liquid crystal display
Indicators	L.E.D. status indicators
Alarm	Audible and visual alarms provide pass/fail indication
Diagnostics	Built-in self diagnostics test ROM, RAM and output system
Safety	CE mark certified to EN61010
Accessories	K-2, VIC-3, BBL-2 and operator's manual supplied with unit
Warranty	Extended 5 year parts and labor with annual factory calibration and maintenance. Standard warranty one year.
Operating Temperature	0°C to 50°C
Humidity	90% RH 0°C to 40°C
Power	115/230 VAC ± 10% 250 VA max
Dimensions	89mmH x 432mmW x 457mmD (3.5"H x 17"W x 18"D)
Weight	11Kg (24 lb.) Net/15Kg (34 lb.) Shipping

30 Day Minimum. Rates are for standard models.
Additional options are available. Please contact factory for a quote or for further assistance.

Duration	Price	Billing Cycle	Buyout
30 Days	$415	30 Days	List Price minus 30% of Rental Paid
60 Days	$624/2 Months	60 Days	List Price minus 40% of Rental Paid
3 to 11 Months	$312/Month	30 Days	List Price minus 50% of Rental Paid
12 Months	$312/Month	30 Days	$1 Buyout

In order to better assist you in the future, we would like to get some basic information from you before you download any of our Manuals. We respect your right to privacy and do not and will not ever share this information with any third party. Please review our privacy policy for more information.

Country:*
Name:*
Company:
Phone (optional):
E-mail:*
	Please subscribe me to the Vitrek newsletter mailing list.

Back

Last Updated: Thursday, 17 May 2012 20:15